Minitor V (5) Features:

• Selective call F1 - The pager is quiet until the tones on channel 1 are sent, then the pager alerts and turns on the audio so you can hear the transmission
• Selective call F2 - The pager is quiet until the tones on channel 2 are sent, then the pager alerts and turns on the audio so you can hear the transmission
• Monitor F1 - Monitors all the traffic on channel 1 and alerts whenever the tones are sent
• Monitor F2 - Monitors all the traffic on channel 2 and alerts whenever the tones are sent
• Probability Scan - The pager will scan between F1 and F2 stopping whenever a transmission is detected on either channel. The pager will lock onto the channel and will not release that channel until the transmission ends. The pager will alert in both F1 and F2 channels when in the non priority scan position.
• Priority Scan - This function will scan for this first active channel, but when F2 is the active channel, will scan back at periodic intervals looking for activity on the priority channel F1. Should F1 become active, the pager will switch to F1 until activity ceases.
• Silent Scan - Scans between F1 and F2 but does not open the audio unless you receive an alert.

Note: Each of the above options can be set to (Alert only) (Vibe only) or (Alert & Vibe)